Intercom Systems – RTS
Specifications
| LCD Display | |
| Active Area | 120.10 mm (wide) x 35.86 mm (high) |
| Dot Resolution | 576 x 172 pixels |
| Color Resolution | 16-bit (64K)RGB color |
| View Angle | 80 degrees (typical; all directions) |
| Power Supply | |
| Type | Internal |
| AC Input | 100–240VAC 50/60Hz |
Specifications | |
| General Purpose Inputs and Outputs | |
| Outputs | |
| Type (relays) | SPDT |
| Contact Rating | 1AMP @ 30VDC |
| Inputs | |
| Type | Optically Coupled |
| Input Voltage | 5-18 VDC on A+ * A+ is internally pulled to 5VDC. Connect K- to to activate. |
| Inputs | |
| Matrix | |
| Type | Balanced |
| Typical Input Level | +8dBu |
| Typical Input Impedance | >10kΩ |
| Maximum Input Level | +20dBu |
| Supported Bandwidth | 100Hz to 20KHz |
| Aux | |
| Type | Balanced |
| Typical Input Level | +8dBu |
| Typical Input Impedance | >20 k Ω |
| Maximum Input Level | >+20 dBu |
| Supported Bandwidth | >100 Hz to 20 kHz |
| Front Panel Mic | |
| Type | Electret |
| Typical Input Level | -42dBu |
| Typical Input Impedance | 1kΩ |
| Maximum Input Level | -25dBu |
| Rear Panel Mic | |
| Type | Electret |
| Typical Input Level | -42dBu |
| Typical Input Impedance | 1kΩ |
| Maximum Input Level | -25dBu |
| Left and Right Headset Mic - Electret | |
| Typical Input Level | -42dBu |
| Typical Input Impedance | 1kΩ |
| Maximum Input Level | -25dBu |
| Front and Rear Headset Mic - Dynamic | |
| Typical Input Level | -50dBu |
| Typical Input Impedance | 600Ω |
| Maximum Input Level | -25dBu |
| Outputs | |
| Matrix | |
| Type | Balanced |
| Typical Output Level | +8dBu |
| THD+N% | <0.20% |
| Typical Output Impedance | 600Ω |
| Maximum Output Level | +20dBu |
| Frequency Response | 100Hz to 20KHz |
| MIC/LINE Out | |
| Type | Balanced |
| Typical Output Level | +8dBu |
| THD+N% | <0.20% |
| Typical Output Impedance | 600Ω |
| Maximum Output Level | +20dBu |
| Frequency Response | 100Hz to 20KHz |
| Headset - Front, Rear, Left, Right | |
| Maximum | |
| Output Power | 125mW for 32Ω load |
| Earphone Impedance | 16Ω and above |
| THD+N% | <0.20% |
| Frequency Response | 100Hz to 20KHz |
| Speaker - Rear | |
| Maximum Output Power | 5W for 8Ω load |
| Speaker Impedance | 4Ω and 8Ω |
| THD+N% | <0.20% |
| Frequency Response | 20Hz to 20kHz |
| Digital | |
| OMNEO Channels | |
| Typical OMNEO Latency | 1ms |
| Frequency Response | 20Hz - 20KHz |
| Environmental | |
| Dimensions | 3.60 in. H x 10.63 in. W x 9.35 in. D (91.5 mm H x 270.1 mm W x 237.6 mm D) |
| Weight | |
| Weight | 3.70lb (1.68kg) |
| Temperature | |
| Operating | 32°F to 122°F (0°C to 50°C) |
| Storage | -4°F to 158°F (-20°C to 70°C) |
| Power Consumption | |
| Nominal | 22 Watts |
| Maximum | 39 Watts |
| Maximum Volt Amp | 63 VA |
| Certification | CE Compliance UL Certified |
Downloads
| Name | Language & Download |
|---|---|
| OMNEO Network Requirements & Considerations | en |
| Name | Language & Download |
|---|---|
| RTS 2025 Software & Firmware Suite | Download |