WM-1000
1CH wall mount intercom system
- Intercom Listen Key
Both momentary (push-to-listen) and latching (hands-free listen) are possible.
- Call Key
Used to send call signals on the intercom channel and to indicate incoming calls.
- Intercom Talk Key
Both momentary (push-to-talk) and latching (hands-free talk) are possible. Additionally, the WM-1000 / WM-2000 have a feature called “mic kill receive” which lets an operator at a remote master station (such as the US-2002) turn off the talk key.
- Dynamic-Mic Headset Connector
4-pin male XLR connector accepts headsets with monaural headphones and either a balanced or unbalanced dynamic microphone.
- Volume Control
Adjusts intercom volume to headset.
- Audiocom / Clear-Com Selector Switch
The selector switch sets the intercom station for compatibility with either Audiocom or Clear-Com channel connector pin-outs, channel power requirements, and call signaling requirements.
- Configuration DIP switches
DIP switches are provided to enable/disable the following features: Call Beep: An optional call beep tone can be used for incoming call notification. Headset Microphone. Type Selection: Balanced or unbalanced microphone may be selected. DC Call Enable: This may be turned on to use the intercom station with intercom systems that use DC call signaling.
- Connections Terminal Block
Used to connect intercom channel(s) and an optional local power supply.
- Sidetone Trimmers
These are used to adjust the level of the station operator’s own voice in the headphones.
- Mounting Holes
The mounting holes fit any standard, two-gang electrical box
- Clear-Com Compatible
- This product is not CE certified.
Wall-mount, one-channel headset station. Mounts in a standard electrical outlet box (doublewide type). High-quality audio system with mic limiter circuit. Back-lit control buttons for low-light operation. Talk and listen buttons with momentary/latching operation. Call/send button with call/receive indicator light. Call/receive beep tone with on/off selection. Mic Kill Receive with on/off selection. Side tone trimmer. Quick-connect, wire clamp terminals for party-line wire connections. Four-pin male XLR headsets (balanced or unbalanced microphone). Powered from party-line, local power optional. Clear-Com compatible.
Specifications
| Form Factor | Wall Plate |
| Channels | 1 |
Downloads
Warranty & After Sales Programs
Similar Products
Compatible Products