TR-700
UHF wireless intercom 1CH transceiver
- Bat/Overmod Light (BAT/OM)
Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.
- On/Off Volume Control
Turns the beltpack power on and controls head set volume
- Talk Button
Press to enable the audio path from the local headset microphone. The talk will turn red when enabled. A quick press and release latches the talk function, unless latching has been disabled in programming. Holding the button down for over ½ second, will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on, pressing the talk button again will turn it off.
- Talk Light
Will turn red when enabled by associated TALK or WTA button
The RTS BTR-700 UHF-synthesized wireless intercom system offers the ultimate in reliable, high performance, high fidelity full duplex communications. The BTR-700 system includes the BTR-700 frequency-agile base station, working with up to four TR-700 frequency-agile beltpacks. The BTR-700 system is perfectly suited for stand-alone operation and can interface with RTS Audiocom, RTS Two-Wire Intercom, Clear-Com as well as RTS Digital Matrix Intercom systems and other four-wire communications systems. In addition to the external intercom systems interfaces listed above, the system provides connections for auxiliary balanced audio input and output. The RTS BTR series has been designed for reliable, efficient operation. Operating in the 518 to 868 MHz range, the units operate reliably at line-of-sight distances of 1,000 feet. With available antenna systems from RTS, the effective operating range can be extended. The TR-700 high efficiency beltpacks provide 12-14 hours of uninterrupted operation using standard alkaline batteries.
Specifications
| Frequency Band of Operation | 518 - 608 MHz, 614 - 740 MHz, 796 - 868 MHz in 18 MHz TX and RX bands |
| Transmit Power | 50 mW Max. (Auto-power reduction) |
| Power Requirements | 6 “AA” Cells Alkaline (NiMH optional) |
Specifications |
|
| Form Factor | Beltpack |
| Distortion | < 1 (at full deviation) |
| Storage Temperature | -4°F to 130°F (-20°C to 55°C |
| Frequency Response | 300 Hz-8 kHz |
| Antenna | ¼ Wave (supplied), Screw type, Replaceable (TX/RX) |
| Type | Dual Conversion Superheterodyne, four Independent Synthesized IFs, FM, 712 channels each |
| Function | User Station |
| Microphone Input Sensitivity | 7 |
| Local Headset Output | 40 mW output into 600Ω (1% Distortion) |
| Current Draw | 140 (Push-to-Talk, Talk On) |
| RF Frequency Stability | 0.005 |
| RF Sensitivity | < 0.7 (for 12 dB SINAD) |
| Squelch Threshold | 20 (SINAD) |
| IF Selectivity | 3 (at 230 kHz) |
| Image Rejection | 70 (or better) |
| Squelch Quieting | 90 |
Downloads
Technical Documentations
| Name | Language & Download |
|---|---|
| Btr-700 Simplified Declaration of Conformity (Red) | EN |
| Btr-700, EC Declaration of Conformity | EN |
| Eac, Btr-700, Tr-700, Btr-800, Tr-800, Tr-825, Cert. No. 05757, 2017-12-26 Certificate | EN |
| Fcc, Btr-700, Grant of Equipment Authorization Fcc Id: B5Dm516 Certificate | EN |
| Ic, Btr-700, Technical Acceptance Certification No. 1321231218A Certificate | EN |
| Name | Language & Download |
|---|---|
| BTR-700 Technical Data Sheet | EN |
| Name | Language & Download |
|---|---|
| Warranty conditions for RTS products in North America | EN |
Let's talk
RTS and our certified partners are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:
- System Design
- Installation
- Programming & Commissioning
Warranty & After Sales Programs
