DKP-4016

Desktop/wall-mount, 16 keys

  • Backward compatible with older technologies such as analog audio in USOC and 568-B connector formats.
  • All previous options hardware connectors (RC, GPI, and Ancillary items) are now standard.
  • New wide-angle high-definition display.
  • Enhanced navigation menus optimized for ease of use.

Specifications

LCD Display
Active Area120.10 mm (wide) x 35.86 mm (high)
Dot Resolution576 x 172 pixels
Color Resolution16-bit (64K)RGB color
View Angle80 degrees (typical; all directions)
Power Supply
TypeInternal
AC Input100–240VAC 50/60Hz

General Purpose Inputs and Outputs
Outputs
Type (relays)SPDT
Contact Rating1AMP @ 30VDC
Inputs
TypeOptically Coupled
Input Voltage5-18 VDC on A+
* A+ is internally pulled to 5VDC. Connect K- to to activate.
Inputs
Matrix
TypeBalanced
Typical Input Level+8dBu
Typical Input Impedance>10kΩ
Maximum Input Level+20dBu
Supported Bandwidth100Hz to 20KHz
Aux
TypeBalanced
Typical Input Level+8dBu
Typical Input Impedance>20 k Ω
Maximum Input Level>+20 dBu
Supported Bandwidth>100 Hz to 20 kHz
Front Panel Mic
TypeElectret
Typical Input Level-42dBu
Typical Input Impedance1kΩ
Maximum Input Level-25dBu
Rear Panel Mic
TypeElectret
Typical Input Level-42dBu
Typical Input Impedance1kΩ
Maximum Input Level-25dBu
Left and Right Headset Mic - Electret
Typical Input Level-42dBu
Typical Input Impedance1kΩ
Maximum Input Level-25dBu
Front and Rear Headset Mic - Dynamic
Typical Input Level-50dBu
Typical Input Impedance600Ω
Maximum Input Level-25dBu
Outputs
Matrix
TypeBalanced
Typical Output Level+8dBu
THD+N% <0.20%
Typical Output Impedance600Ω
Maximum Output Level+20dBu
Frequency Response100Hz to 20KHz
MIC/LINE Out
TypeBalanced
Typical Output Level+8dBu
THD+N%<0.20%
Typical Output Impedance600Ω
Maximum Output Level+20dBu
Frequency Response100Hz to 20KHz
Headset - Front, Rear, Left, Right
Maximum
Output Power125mW for 32Ω load
Earphone Impedance16Ω and above
THD+N%<0.20%
Frequency Response100Hz to 20KHz
Speaker - Rear
Maximum Output Power5W for 8Ω load
Speaker Impedance4Ω and 8Ω
THD+N%<0.20%
Frequency Response20Hz to 20kHz
Digital
OMNEO Channels
Typical OMNEO Latency1ms
Frequency Response20Hz - 20KHz
Environmental
Dimensions3.60 in. H x 10.63 in. W x 9.35 in. D
(91.5 mm H x 270.1 mm W x 237.6 mm D)
Weight
Weight3.70lb (1.68kg)
Temperature
Operating32°F to 122°F (0°C to 50°C)
Storage-4°F to 158°F (-20°C to 70°C)
Power Consumption
Nominal22 Watts
Maximum39 Watts
Maximum Volt Amp63 VA
CertificationCE Compliance
UL Certified

Videos

KP Series Professional Intercom Keypanels for Studio

OMNEO Media Network Technology for RTS Intercom Systems

KP-Series Keypanels User Interface

Downloads

Warranty & After Sales Programs

sprites_global sprites_ev