Digital beltpack

DBP is a four-channel/four-button wired beltpack that runs on PoE+ (Power over Ethernet 802.3af and 802.3at) and connects using OMNEO IP technology. Its unique hybrid design supports both digital partyline and matrix keypanel modes: for use as a digital partyline device, DBP connects to an OMS; for use as a portable keypanel, including functionality like point-to-point communication, DBP can be connected to any RTS digital/IP matrix product using OMNEO – including OMI cards in ADAM/ADAM-M frames or OMNEO ports on ODIN frames. DBP automatically selects the correct mode of operation (digital partyline/OMS or keypanel/matrix) when connected and switched on.

DBP’s PoE-driven design gives it an unmatched level of scalability and makes it easy to add new users. In and Out PoE ports (two etherCON locking RJ45 connectors) allow up to six DBP devices to be daisy-chained together from the same PoE switch port when used in partyline mode. Up to 40 DBPs can be connected to an OMS, allowing for the creation of an extensive digital partyline system – all in addition to the other wired and wireless devices OMS supports. Depending on the matrix model/configuration, up to 64 DBPs can be connected to an OMI card for ADAM matrices, and up to 128 DBPs can be connected to one ODIN.


Power Supply
DC PoE 802.3af / 802.3at
Maximum Power Consumption 4.0W (PoE DC Input)
Operating Temperature -4° F to 113° F (-20° C to 45° C) 5% to 90% relative humidity
Storage Temperature -4° F – 158° F (-20° C – 70° C) 15% to 90% relative humidity
Dimensions 5.51 in. (140mm) L x 3.94 in. (100mm) W x 2.64 in. (67mm) D
Weight 0.75 lbs (340 g)

Microphone Pre-Amplifier
XLR Input
Electret Mic Input -42.5 dBu Nominal
Dynamic Mic Input -50 dBu Nominal
Frequency Response 100 Hz to 16 kHz
3.5mm Input
Electret Mic Input -42.5 dBu Nominal
Frequency Response 100 Hz to 16 kHz
Headphone Amplifier
Frequency Response 100 Hz to 16 kHz
OMNEO Ports (PoE In and PoE Out)
Maximum Capacity 2 Full-duplex ports
Copper Connector Type RJ-45
Format IEEE 802.3 compliant
Copper Ethernet Speed 100/1000 Mbps
Bluetooth Version 4.0
Approved dongles IO Gear GBU522
LM Technologies LM506
Range 15 ft (5 m)
Audio Codec SBC
TFT Display
Active Area 27.72 mm (wide) x 27.72 mm (high)
Dot Resolution 240 x 240 pixels
Color Resolution 16-bit (64K) RGB color
View Angle 80° (typical, all directions)
Protective Lens Anti-Glare / Anti-Reflective
Approvals CE Compliant
UL Certified
These specifications are preliminary and subject to change without notice.


RTS digital partyline intercom: Meet OMS & DBP

How to connect RTS Digital Beltpack (DBP) to ODIN Digital Intercom

The New Digital Partyline Products from RTS Intercoms - ISE Digital 2021

RTS Digital Beltpack (DBP) for OMNEO Main Station (OMS) Webinar

RTS DBP (Digital Beltpack)'s hybrid functionality

How user friendly is RTS DBP (Digital Beltpack)

Where can you use RTS DBP (Digital Beltpack)

Daisy chaining RTS DBP (Digital Beltpack)

Introduction to RTS Digital Partyline DBP (Digital Beltpack)

Introducing DBP

DBP Digital Partyline Intercom Beltpack Overview by Nico Lewis

DBP Overview by Angelo Piga

DBP Digital Beltpack at #infocomm


Warranty & After Sales Programs

sprites_global sprites_ev